200kg Jib Crane Equipped with Efficient And Accurate Intelligent Hoist

Basic Info.

Product Introduction

The cantilever crane has the following main components and features:

Column: The column of a cantilever crane is a vertical support structure, usually made of steel, fixed to the ground or other supporting foundation. The columns provide stability and support for the cantilever crane.

Cantilever arm: The cantilever arm is a horizontal arm extending from the column, which can have different lengths and shapes, according to specific needs. The length of the cantilever arm determines the handling range of the cantilever crane.

Rotation and movement mechanism: The cantilever crane usually has a rotation and movement mechanism, so that the cantilever arm can be rotated or moved in the horizontal direction. In this way, the working range and position of the cantilever crane can be adjusted to adapt to different handling needs.

Hook or other handling device: The end of the cantilever arm of a cantilever crane is usually equipped with a hook, clamp or other handling device for connecting and lifting heavy objects. These devices can be replaced or adjusted as needed.

The cantilever crane can be configured with a variety of lifting systems, depending on the application requirements of the cantilever crane and the nature of the handling task. Here are some common lifting system configurations:

Wire rope lifting system: This is a common lifting system consisting of wire ropes and pulleys. The wire rope is connected to the hook or other handling device to achieve the lifting and handling of heavy objects by lifting them up and down. This system is usually suitable for small and medium-sized cantilever cranes with low lifting capacity.

Chain lifting system: The chain lifting system uses a chain to connect the hook or handling device, and realizes the lifting and handling of heavy objects by rolling the chain up and down. Chain lifting systems are usually suitable for cantilever cranes with medium lifting capacity, such as for factory floors, warehouses and other places.

Hydraulic lifting system: Hydraulic lifting system through the hydraulic cylinder and hydraulic pump and other components to achieve heavy lifting and handling. This system has a high lifting capacity and stability, and is suitable for cantilever cranes that require high load capacity and precise control.

Electric lifting system: Electric lifting system uses electric motors and gear mechanisms and other devices to achieve the lifting and handling of heavy objects. This system has high lifting speed and accuracy, and is suitable for cantilever cranes requiring frequent handling and efficient operation.

Models for Reference

Here we put some of the models that we used mostly for our programs for your reference.

1.Electric hoist

2.Intelligent  hoist

3.Pneumatic air balancer

Installation Way

There are different types of cranes based on how they are installed. These include cantilever crane, folding arm crane, movable base cantilever crane, and truss crane. Cantilever crane and the folding arm crane are the most commonly used ones.

Working Scenario